Thorax Drop Tower Rig - G.AA
Home › Thorax Drop Tower Rig - G.AA
The G.AA Drop Rig utilizes an electro-magnet to release a 7.78 kg impactor probe along a cable-guided free fall to certify the deflection response of EuroSID family rib modules. Rib deflections are measured with a linear potentiometer mounted within the rib module.
Drop test are conducted form various heights depending on the rib type
Additional hardware is available to conduct inspection tests on rib damper components only using a 1.0 kg impactor.
Base Fixture Dimensions:
|Overall Height - Module Certification||~100 Inch*|
|Overall Height - Damper Inspection||~270 Inch*|
*Height varies from facility to facility. Fixture is mounted to existing ceiling or custom made bracket
Specification for Std Drop Height (+1%)
|Lower Limit||Upper Limit||Lower Limit||Upper Limit||Lower Limit||Upper Limit||Lower Limit||Upper Limit|
- Crash Test Dummies
- Frontal Impact
- Side Impact
- Rear Impact
- Aerospace & Military
- Specialty Products
- Engineer to Order
- iCrash Technology
- OccuForm Hard Shell
- FMH Positioning Tool
- H-Point Machine
- Virtual Models
- Test Equipment Matrix
- A tool used to determine Test Equipment model numbers for each dummy type and location...
- Load Cell Matrix
- A tool used to determine Load Cell model numbers for each dummy type and location...