Specialty Sensors & Accessories

Specialty Sensors

Gyro Sensor (3 Axial) - Model IES-3103 - Three axis small and light-weight gyro sensors with measuring ranges of 150 °/s, 300 °/s, 600 °/s, 1200 °/s, 2400 °/s, 3600 °/s and 4800 °/s suitable for various measurements in the crash test industry.
 
Gyro Sensor (6 Axial with Acceleration) - Model IES-3106 - Sensor system composed of three orthogonally mounted small and light-weight gyro sensors with measuring ranges of 600 °/s, 1200 °/s, 2400 °/s, 3600 °/s or 4800 °/s and three 7264-type 2000 g acceleration sensors mounted according to WG17 specifications. Suitable for various measurements in the crash test industry.
  
Belt Movement Sensor - Model IES-2098 - Converts the movement of a belt to an analog output voltage for car crash testing, characterization of belt retractors and the characterization of seats.
 
Door Opening Force Sensor - Model IES-1501 - Door opening force sensor with USB interface enables recording of static and dynamic opening forces on a notebook computer. The graph is displayed online on the PC screen. PC software handles a list of measuring locations and exports ISO data files.
 
Gyro Sensor (1 Axis) - Model IES-3101e - One axis small and light-weight gyro sensor with measuring ranges of 150 °/s, 300 °/s, 600 °/s, 1200 °/s, 2400 °/s, 3600 °/s and 4800 °/s suitable for various measurements in the crash test industry.
 
Tilt Sensor (Dual Axis) - Model IES-1402e - Dual axis very small and light-weight tilt sensor with digital readout intended for integration into crash test dummies or other testing equipment.

Accessories

3D-CamSplitter - Model IES-4720 - Optical mirror device splits camera´s field of view in two halfs, effectively giving two virtual cameras with fixed geometry, thus allowing 3D photogrammetry with just one high speed camera. A variety of mount adaptors for common HS cameras is available.
 
Airbag Timer - Model IES-3400A / IES-3401A- Controller for delayed ignition of airbag squibs with 4 independent timed outputs.
 
Laser Liner - Model IES-1470 - PC controlled positioning aid for anthropomorphic crash test dummies.  Two laser lines (horizontal, vertical) are projected onto the dummy and are electrically driven in position according to positioning data on a PC.  Buttons for up, down, left, right movement and the actual position display enable definition of new positions as well as distance measurements. Slave device available for both side positioning situations. PC software imports/exports Excel CSV-files (ASCII).
 
Miniature Ammeter - Model IES-1104e - Very small current detection clamp with a hinged cap for the galvanical isolated detection of DC and pulsed currents with standard data acquisition systems. Mainly intended for the detection of short circuit or other abnormal currents in automotive safety tests.
 
Miniature Ammeter - Model IES-1105 - Miniature current detection clamp with a hinged cap for the galvanical isolated detection of DC and pulsed currents with standard data acquisition systems. Mainly intended for the detection of trigger events of restraint components and the switching of other electrical components such as fuel pumps and door locks in automotive safety tests.
 
Rollover Horizon Display - Model IES-3200 - The modular Rollover Horizon Display System consists of one or more displays IES3202, a combined Tilt/Rate sensor IES3201 and a controller unit IES3205.  The system displays the angular position of the horizon during rollover tests and serves as an orientation aid for film analysis. Up to four event signals such as time zero or activation times of restraints or contact signals from dummy interaction can additionally be displayed. The angular rate signal and the online calculated dynamical tilt signal are available as analog output for recording with a DAS.