Hybrid II 50th Male Dummy
Available Product Lines
- Denton Brand - SA-150-M002 (ATD Assembly, non-instrumented)
The Hybrid II 50th Percentile Male Test Dummy, originally designed by Alderson Research Laboratories, was modified by General Motors and the National Highway Traffic Safety Administration (NHTSA) using Alderson and Sierra Engineering parts. This dummy was capable of generating test data with sufficient biofidelity to be used for automotive crashworthiness testing. In 1973, the dummy was mandated by NHTSA for use in testing automotive restraint systems to meet Federal Motor Vehicle Safety StandardNo.208 (FMVSS 208).
Non-automotive applications for the Hybrid II test dummy include equipment and injury potential studies of recreation vehicles, wheel chairs, medical equipment and sports gear.
The size and weight of the Hybrid II 50th Percentile Male Test Dummy represent the "average" of the USA adult male population. The design incorporates the range of motions, centers of gravity and segment masses determined by anthropometric studies to simulate those of human subjects.
Head and Neck
Three-piece skull weldment with vinyl skin has a two-piece back-plate weldment for access to instrumentation.
Cylindrical rubber neck assembly is mounted on neck bracket with fixed angle of 15 degrees forward.
Abdomen with vinyl skin and foam flesh is easily removed from area surrounding lumbar spine.
Pelvis has ball and socket femur joints with friction plungers to control hip ball motion. Cast bronze femurs with slotted ball control range of motion.
Legs are steel skeletons with vinyl skin and foam flesh. Thighs accept femur force load cells or force measurement. Knee and thigh flesh are removable. Standard model is sit construction only. Options include sit/stand version, submarining indicator pelvis, and selected instrumentation.
Straight cylindrical butyl rubber lumbar spine incorporates cable for strength.
The following materials used in the dummy construction are required by Federal Code:
- Steel skeletal components with some aluminum and bronze joints
- Solid vinyl head skin and cap
- Natural rubber neck
- Vinyl skin chest jacket over vinyl foam with Ensolite® pad assembled behind the ribs
- Butyl rubber lumbar spine
- Vinyl skin covering urethane foam abdomen
- Vinyl skin and vinyl foam flesh pelvis over cast aluminum skeleton
- Vinyl skin and vinyl foam flesh arms and legs over steel skeletons.
- Solid vinyl hand skin over steel skeletons
|Head:||3 Accelerometers in a Triax Pack||Ax,Ay,Az (used for HIC)|
3 Accelerometers in a triaxial array
Three-Axis Lumbar Spine Load Cell
Six-Axis Lumbar Spine Load Cell
Fx, Fy, Fz
3 Accels or 1 Triax pack
Ax, Ay, Az
Uniaxial Femur Load Cell
Fx (per leg)
- FTSS Test Equipment Matrix for this Dummy
- Denton Test Equipment Matrix coming soon...
|Part||Weight (lb)||Weight (kg)|
|Lower Arms and Hands||9.6||4.35|
|Lower Legs and Feet||19.4||8.80|
|Description||Dimension (in)||Dimension (cm)|
|Erect Sitting Height||35.7||90.7|
|Shoulder to Elbow Length||13.8||35.1|
|Elbow to Finger Tip Length||18.1||46.0|
|Buttock to Knee Pivot Length||20.4||51.8|
|Knee Pivot to Floor Length||19.6||49.8|
- Crash Test Dummies
- Frontal Impact
- Side Impact
- Rear Impact
- Aerospace & Military
- ATD Lead Disclosure
- Test Equipment
- Virtual Models